 |
Untitled.jpg (118,204 bytes)
Untitled2.jpg (76,828 bytes)
3d Slicer error.jpg (206,465 bytes) |
 |
SlicerHeart has some volume ultrasound import tools that might help. https://www.slicer.org/wiki/Documentation/Nightly/Extensions/SlicerHeart Otherwise have a look at the DICOM FAQ and report back with info based on the suggestions there: |
|
|
Dear Pieper, thank you for your fast reply. I have installed SlicerHeart extension as you said but the same problem appeared. Then I examined data in advanced mode as one pop up message said and the message appeared as seen in the picture. I am not sure what does it mean, so if you could help me please or if you are willing I could send you DICOM data that I have (it is around 40 MB, but I can compress it) so you could examine it by yourself. Best regards, Vjekoslav.
Untitled4.jpg (94,751 bytes) |
|
|
Hi Vjekoslav - The message about 'not containing geometry information' probably means this is a secondary capture (screenshot) or similar that maybe can't be read as a 3D volume. With the series selected you can use the Metadata button and scroll through the dicom headers to see if there's coherent data. You might also try loading it via File->Add Data instead of using the dicom database. If there's any patient-identifying data you shouldn't send it to me or post it here. That may mean you need to do some more debugging on your own to sort this out. Hope that helps, |
|
|
When I try to open a .jpeg format or other picture format (screenshot) it opens it as picture. This happens when I try to open .dcm or .vol file that I saved for done US study. Thank you for your time. |
 |
GE Kretzfile 3D .vol files can be opened in DICOM module if SlicerHeart extension is installed. See limitations described in https://github.com/SlicerHeart/SlicerHeart/blob/master/README.md. If the problem persists then submit an issue to SlicerHeart extension (https://github.com/SlicerHeart/SlicerHeart/issues). |
- Anonymous
