View Issue Details
ID | Project | Category | View Status | Date Submitted | Last Update |
---|---|---|---|---|---|
0002319 | Slicer4 | Core: Base Code | public | 2012-07-12 05:42 | 2014-03-06 04:51 |
Reporter | OutsiderSe | Assigned To | jcfr | ||
Priority | normal | Severity | major | Reproducibility | N/A |
Status | closed | Resolution | fixed | ||
Product Version | Slicer 4.1.1 | ||||
Target Version | Slicer 4.2.0 | Fixed in Version | Slicer 4.2.0 | ||
Summary | 0002319: unable to run Slicer.exe as it crashes due to an unknown error | ||||
Description | I've built the Slicer.v4 on my windows 7 successfully, but the problem is that the slicer doesn't work at all, in fact when I run the slicer.exe, a command window showing an error appears for a couple of seconds and then both of them ( the command window and slicer ) will be closed, the error says : .../bin/debug/slicerApp-real.exe exit abnormally - Report the problem | ||||
Tags | No tags attached. | ||||
2012-07-12 05:42
|
|
Can you run: 1) .\Slicer.exe --launcher-version 2) .\Slicer.exe --help 3) .\Slicer.exe --disable-cli-modules --disable-loadable-modules --disable-scripted-loadable-modules If you build, with the following options, do you still have the issue: 1) Slicer_USE_NUMPY to OFF 2) Slicer_USE_PYTHONQT_WITH_TCL to OFF, Slicer_USE_NUMPY to OFF 3) Slicer_USE_PYTHONQT to OFF |
|
Re-open if this is still an issue. Make sure to try the suggestion listed in issue note 5153 |
|
Closing resolved issues that have not been updated in more than 3 months |
|
Date Modified | Username | Field | Change |
---|---|---|---|
2012-07-12 05:42 | OutsiderSe | New Issue | |
2012-07-12 05:42 | OutsiderSe | File Added: Untitled.jpg | |
2012-07-16 13:10 | jcfr | Note Added: 0005153 | |
2012-07-16 13:10 | jcfr | Assigned To | => jcfr |
2012-07-16 13:10 | jcfr | Status | new => feedback |
2012-08-22 05:42 | jcfr | Target Version | => Slicer 4.2.0 - Feature freeze Sept 1st 2012 |
2012-08-22 11:07 | jcfr | Note Added: 0005713 | |
2012-08-22 11:07 | jcfr | Status | feedback => resolved |
2012-08-22 11:07 | jcfr | Fixed in Version | => Slicer 4.2.0 - Feature freeze Sept 1st 2012 |
2012-08-22 11:07 | jcfr | Resolution | open => fixed |
2014-03-06 04:50 | jcfr | Note Added: 0010708 | |
2014-03-06 04:51 | jcfr | Status | resolved => closed |