0001388: Slice view doesn't change when after selecting the menu - MantisBT

ID	Project	Category	View Status	Date Submitted	Last Update

0001388	Slicer4	Core: GUI	public	2011-09-01 10:26	2012-08-21 11:31

Reporter	hjmjohnson	Assigned To	finetjul
Priority	normal	Severity	major	Reproducibility	always
Status	closed	Resolution	fixed
Product Version	Slicer 4.0.0
Target Version	Slicer 4.0.0	Fixed in Version	Slicer 4.0.0

Summary	0001388: Slice view doesn't change when after selecting the menu
Description	I've had this issue with Slicer4 for quite some time now, so I thought I'd make a video to show what I am seeing: http://media.shinywhitebox.com/hans-johnson/d-slicer-gamma- Hans
Tags	No tags attached.

finetjul 2011-09-04 16:41 administrator ~0002903	What are the steps to reproduce ? Do you load a scene ? a volume ? apply filters ? Does it always happen ? What happens if you: start slicer load a volume try to change the current volume in the slice view controller menu

finetjul 2011-09-10 22:32 administrator ~0002970	From Steve: I can't reproduce this either - are you sure the two volumes overlap in RAS space? Can you try the two brain tumor volumes from the sample data and see if that works? Or try centering the volumes with the button in the Volumes module's Info tab.

finetjul 2011-09-10 22:33 administrator ~0002971	From Hans: This has been the behavior on my computer for quite some time now. I have Qt 4.7.3 installed on Mac 10.6.8, and a pretty standard "Release" build. I did a clean build, and got the same behavior. My home account is on an NFS mount point, and the executable is on local disk. Any two images loaded, and I can not switch between them.

pieper 2011-09-18 10:51 administrator ~0003080	I found I can reproduce this issue, but only one one particularly machine/Qt combination (so far at least). Tested with revision 18104 on mac 10.7 (lion) with Qt 4.7.3 with a debug build fails in the way Hans shows. Same code on mac 10.6 (snow leopard) with Qt 4.6.2 does not have the problem. Using the python console I checked and the vtkMRMLSliceComposite node matches what is displayed, so the issue must be somewhere in the node combo box not accepting the selection. Another clue: go into any command line module (Say, Filtering->Threshold Image). Initially there are volumes selected in the combo boxes, but trying to pick a different one results in the combo box reverting to "Select a Volume".

hjmjohnson 2011-10-16 06:43 developer ~0003182	FYI: I just updated to QT 4.7.4, and the problem does not seem to be present on 10.6. I'm trying 10.7 today. Perhaps it is just a bug in Mac version of qt version 4.7.3. That is a bit disturbing, but if that is the case, we should probably just move on to requiring QT 4.7.4 or greater.

finetjul 2011-10-16 20:18 administrator ~0003183	I fixed an odd bug in r18340, it might fix the odd behavior you have. You might want to give a shot.

hjmjohnson 2011-10-26 13:42 developer ~0003213	Perhaps a check for Mac + QT 4.7.3 would be sufficient to close this bug. It appears to be a QT bug that was fixed in 4.7.4. Hans

hjmjohnson 2011-11-15 12:35 developer ~0003320	This problem does not exists in 4.7.4. Only mac 4.7.3 is affected.

Date Modified	Username	Field	Change
2011-09-01 10:26	hjmjohnson	New Issue
2011-09-04 16:39	finetjul	Status	new => assigned
2011-09-04 16:39	finetjul	Assigned To	=> finetjul
2011-09-04 16:41	finetjul	Note Added: 0002903
2011-09-04 16:41	finetjul	Status	assigned => feedback
2011-09-10 22:32	finetjul	Note Added: 0002970
2011-09-10 22:33	finetjul	Note Added: 0002971
2011-09-18 10:51	pieper	Note Added: 0003080
2011-10-16 06:43	hjmjohnson	Note Added: 0003182
2011-10-16 20:18	finetjul	Note Added: 0003183
2011-10-26 13:42	hjmjohnson	Note Added: 0003213
2011-11-15 12:35	hjmjohnson	Note Added: 0003320
2011-11-15 12:35	hjmjohnson	Status	feedback => closed
2011-11-15 12:35	hjmjohnson	Resolution	open => fixed
2012-08-21 11:31	jcfr	Fixed in Version	=> Slicer 4.0.0
2012-08-21 11:31	jcfr	Target Version	=> Slicer 4.0.0