View Issue Details

Jump to NotesJump to History
IDProjectCategoryView StatusDate SubmittedLast Update
0001099Slicer4Module VolumeRenderingpublic2011-02-14 05:422014-03-06 12:29
Reporterinorton Assigned Topieper  
PriorityhighSeverityfeatureReproducibilityN/A
Status acknowledgedResolutionopen 
Product Version 
Target VersionFixed in Version 
Summary0001099: volume render cutout
Description

For trajectory planning purposes, it would be helpful to have a "cutout" feature in the volume rendering module to allow seeing into the volume along the outline of a sphere, cone, or trajectory to some point inside the volume. A camera-based control would be great to adjust the trajectory to the current view angle so that the cutout is continuously centered as the volume is rotated.

TagsNo tags attached.

Activities

pieper

pieper

2013-08-16 08:30

administrator   ~0009490

As an idea, how about trying the VolumeMasker module? It allows you to use an arbitrary labelmap to mask the volume.

It is still experimental but is available from the link here:

http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/ScriptRepository#Filters

I'll also look into other options for this.
pieper

pieper

2014-03-06 12:29

administrator   ~0011278

This won't be included in version 4.4, but it is on the NAC development target list for a custom volume renderer.

Issue History

Date Modified Username Field Change
2011-02-14 05:42 inorton New Issue
2011-03-15 13:01 nicole Assigned To => finetjul
2011-03-15 13:01 nicole Status new => assigned
2011-03-15 13:02 finetjul Assigned To finetjul => alexy
2011-06-30 10:29 finetjul Category QtGUI => GUI
2011-07-02 20:45 finetjul Assigned To alexy => finetjul
2011-07-02 20:45 finetjul Category GUI => Volume Rendering
2011-11-24 04:04 finetjul Priority normal => high
2011-11-24 04:04 finetjul Target Version => Slicer 4.0 post RSNA
2012-10-22 07:36 jcfr Target Version Slicer 4.0.1 => Slicer 4.3.0
2013-08-09 04:30 finetjul Target Version Slicer 4.3.0 => Slicer 4.4.0
2013-08-16 08:27 pieper Assigned To finetjul => pieper
2013-08-16 08:30 pieper Note Added: 0009490
2014-03-06 12:29 pieper Note Added: 0011278
2014-03-06 12:29 pieper Status assigned => acknowledged
2014-03-06 12:29 pieper Target Version Slicer 4.4.0 =>