0000109: Adding or removing input channels destroys intensity distribution data

ID	Project	Category	View Status	Date Submitted	Last Update

0000109	Slicer3	EMSegmenter	public	2007-11-15 08:05	2007-12-08 20:11

Reporter	davisb	Assigned To	davisb
Priority	normal	Severity	minor	Reproducibility	always
Status	closed	Resolution	fixed

Summary	0000109: Adding or removing input channels destroys intensity distribution data
Description	In the EMSegment template builder module, when input channels are changed, the intensity distribution data and other parameters associated with those images are reset to default values (in essence the parameters are lost). This makes is awkward/difficult to change the target images within the template builder module.
Steps To Reproduce	Load the tutorial template, load some new images into Slicer3, change the target images in the EMSegment template builder module
Tags	No tags attached.

Date Modified	Username	Field	Change
2007-11-15 08:05	davisb	New Issue
2007-11-15 08:05	davisb	Status	new => assigned
2007-11-15 08:05	davisb	Assigned To	=> davisb
2007-11-15 08:08	davisb	Category	Base Code => EMSegmenter
2007-12-08 20:11	davisb	Status	assigned => closed
2007-12-08 20:11	davisb	Note Added: 0000203
2007-12-08 20:11	davisb	Resolution	open => fixed

davisb 2007-12-08 20:11 developer ~0000203	On the input channel step, you can add/remove/move input channels and there will be no effect on the parameters. If you click next, and the number of target images changed, you will be warned. If you proceed, only then will the parameters be effected.